Welcome: Jiangsu SangDion Machinery Co., Ltd.
Language: Chinese ∷  English

Hot press composite series

  • Hot press compound machine
Hot press compound machine

Hot press compound machine

  • Commodity No.: 201911031006
  • Drying method: circulating air
  • Door panel: customized
  • Total power: 64.5kw
  • Product description: Hot press compound machine
  • INQUIRY


江苏圣顿机械有限公司

JIANGSU SANGDION MACHINERY CO.,LTD
Main technical parameters and configuration table
I. main technical parameters
(1) manufacturing basis: according to the equipment sample drawing hh-2000 heat recovery machine
(2) heat source: industrial power
(3) roll width: 2000mm
(4) finished product width: 1800mm
(5) mechanical speed: 1-30 / min
(6) installed capacity: About 20KVA
(7) boundary dimension: 9550 × 3000 × 2500mm
II. Main configuration
1. Unwinding and winding device
① two Φ 219 steel cloth rolls
P206 bearing 4 sets
③ two Φ 60 composite roller guide rollers
④ meter counter 1 set
⑤ 1 set of 2.2kW swing reduction motor
⑥ frame 12 × channel steel
⑦ transmission system 1 set
2. Cooling platform device
① two Φ 108 conveyor belt rollers
② 1 rubber conveyor belt
③ one Φ 60 composite idler
④ 1 set of 1.5KW shimmy motor
⑤ two Φ 100 hand wheels
⑥ two M20 screw rods
⑦ frame 12 × channel steel 1
⑧ transmission system 1 set
⑨ number of standard parts
3. Electric heating composite device
① one Φ 240 heat transfer oil heating composite roll
② one Φ 240 water-cooled composite roll
③ 3KW shimmy motor 1 set
④ one Φ 150 active aluminum opener roll
⑤ 1 set of tapping roller (including 0.75KW motor)
⑥ electric heating system 1 set
⑦ 1 set of 0.75KW shimmy motor
⑧ 1 set of aluminum edge blowing device
⑨ two 3KW blow pumps
⑩ Φ 125 cylinder 2 sets
(11) 12 channel steel of frame
(12) transmission system 1 set
Some standard parts such as bearings
4. Material conveying and oven preheating device
① 12 channel steel frame
② two Φ 108 belt rollers
③ two Φ 60 composite idlers
④ 1 set of 1.5KW shimmy motor
⑤ two M20 screw rods of Φ 100 handwheel
6 heating electric heating pipes
⑦ several square tubes of oven 40x40
⑧ transmission system 1 set
⑨ number of standard parts
1 set of hook feeding device
5. Material discharge device
① 12 channel steel frame
② 1 set of pneumatic side facing device
③ 6 Φ 60 composite idlers
④ 1 set of fabric tensioner
⑤ hook discharge device 1 set
⑥ number of standard parts


Scan the qr codeClose
the qr code